Automatic Transmission Fluid, Draining and Filling

Automatic Transmission Fluid, Draining and Filling

- Turn off the engine.

- Remove the inspection plug from the oil pan - arrow - to check the Automatic Transmission Fluid (ATF).





- Remove the overflow tube - 1 - through the inspection hole.





- Drain the ATF.

- Install the overflow tube.

- Install the inspection plug hand tight.

- Add 3 liters of ATF through the fill tube.

- Start the engine, shift through all selector lever positions, you must remain in each position approximately 10 seconds.

- Then check the ATF level and top off, as necessary. Refer to => [ Automatic Transmission Fluid Level, Checking and Filling ] Automatic Transmission Fluid Level, Checking and Filling.