Selector Handle With Cover

Selector Handle with Cover

For all handles there is the possibility to push the button into the handle. Do not install the handle with the button pushed in under any circumstance.

- Before removing, pull the button past it's pressure point - arrow -.





- Secure the button against being pushed in, using a tie strap or wire.

- Unclip the cover.

- Disengage the handle.





- After installing, engage the knob again, push the plastic part beneath the handle downward again.

- Transport protection can be removed on new handles knobs after disengaging.





- Disconnect the connector from the cover.

- Remove the handle upward