Scan Tool Testing and Procedures

Vehicle Tester, Connecting and Selecting Functions

Special tools, testers and auxiliary items required

• Vehicle tester

• Diagnostic Cable (VAS 5051/1)

• Diagnostic Cable (VAS 5051/3)

CAUTION!
• During a test drive you must always secure testing and measuring equipment on the back seat.

• These devices may only be operated by a passenger during a test drive.

- Plug the (VAS 5051/1) or (VAS 5051/3) - 2 - connector into the vehicle's Data Link Connector (DLC).





- Turn on the tester - arrow -.





The tester is ready for operation when you can select between fields/buttons Guided Functions and Guided Fault Finding at the right of the display.

Depending on equipment and tester version, additional functions may be displayed.

Tester is not ready for operation.

- Turn on the ignition.

- Touch a field/button on the display to start the desired function.