Variable Valve Timing Cover / Housing: Service and Repair
Control Housing Assembly Overview
1 Guide rail: clipped in at control housing
2 Control housing
3 Camshaft adjustment valve 1 (N205)
• Removing and installing, refer to --> [ Camshaft Adjuster Valves ] Camshaft Adjuster Valves.
4 Camshaft adjustment valve 1 (exhaust) (N318)
• Removing and installing, refer to --> [ Camshaft Adjuster Valves ] Camshaft Adjuster Valves.
5 8 Nm
• Insert using locking fluid (D 000 600 A2).
Checking Strainer of Control Housing for Contamination
- Unclip strainer - 2 - at rear side of control housing - 1 - and remove possible contamination.