Side Window with Window Regulator, Removing

Side Window with Window Regulator, Removing






- Remove side trim.

- Remove intermediate plate - 2 -. Refer to => [ Intermediate Plate Assembly Overview ] Intermediate Plate Assembly Overview.

- Remove outer window shaft strip. Refer to => [ Window Recess Seals Assembly Overview ] Window Recess Seals Assembly Overview

- Remove speaker.

- Loosen lock nut - 6 -, do not rotate down. Threaded pins and lock nut remain on window regulator.

- Rotate nuts - 3 - down. Threaded pins remain in vehicle.

- Remove window regulator from threaded pins.

- Raise side window with window regulator far enough so that window regulator motor connector can be disconnected.

- Remove side window - 1 - with window regulator - 5 - upward from window recess - arrow -.