Exhaust System: Description and Operation

Clamping Sleeves

Front Clamping Sleeve Installed Position





- Arrow - points in direction of travel.

- Align the front clamping sleeve - 1 - to the mark - A - on the front exhaust pipe - 2 -.

- a - = 5 mm

- Install the clamping sleeve - 1 - so that the end of the bolt does not extend beyond the lower edge of the clamping sleeve.

• Threaded connection points toward the right.

Rear Clamping Sleeve Installed Position





- Install the clamping sleeve so that the end of the bolt does not extend beyond the lower edge of the clamping sleeve.

• Threaded connection points to the rear.