Muffler: Service and Repair
Center and Rear Mufflers, Separating
• A separating point has been provided in the connecting pipe for individual replacement of the center or rear muffler.
• The separating point is marked by depressions around the circumference of the exhaust pipe.
Special tools, testers and auxiliary items required
• Body Repair Saw (V.A.G 1523A)
• Chain Pipe Cutter (VAS 6254)
Procedure
CAUTION!
To prevent injuries from metal shavings, wear protective goggles and protective clothing.
- Separate the exhaust pipe at the separating point - arrow 2 - using (VAS 6254) or (V.A.G 1523A).
- Position the clamping sleeve - 4 - centrally at the end marks - arrows 1 and 3 - when installing.
- Install the clamping sleeve so that bolt end - arrow - does not project beyond the lower edge of the clamping sleeve.
• Threaded connection points to the rear
- Install the exhaust system free of stress. Refer to => [ Exhaust System, Installing ] Exhaust System, Installing.
Tightening Specifications