Hose Connections With Connection Couplings, Assembly

Hose Connections with Connector Couplings, Connecting

CAUTION!
The connector coupling sealing ring can be damaged if the securing clamp is in the locked position when installing. This would result in a leak. Follow the assembly instructions.

Removing

- Release the connector coupling by pulling the locking clip - arrow -. Separate the hose/pipe without assistance from tools.





Installing

- When replacing the sealing ring, lay the ring in the charge air hose groove. Ensure the sealing ring sits completely in the groove all the way around and is not twisted.

- Lubricate the sealing surfaces and sealing ring.

- Bring the securing clip into the released position - 1 -.





- Slide the charge air hose onto the charge air pipe as far as the stop.

- Bring the securing clip into the locked position - 2 - and then pull the charge air hose back again.

- Check for correct seating and proper locking of the connector by pulling on the hose.