Variable Valve Timing Actuator: Service and Repair

Camshaft Adjustment Valve 1 (N205)

- Remove the charge air pipe from the noise generator, if equipped. Refer to => [ Charge Air Pipe from Noise Generator ] Charge Air Pipe from Noise Generator.





- Disconnect the connector from the camshaft adjustment valve 1 - 1 -.

- Remove the bolts - arrows - and then the camshaft adjustment valve 1.

Installing

• Tightening specifications, refer to => [ Timing Chain Covers Overview ] Timing Chain Cover Assembly Overview.

Installation is performed in reverse order of removal, noting the following:

- Lubricate the seal and O-ring with engine oil.