Heating and A/C Control Trim

Heating and A/C Control Trim

Removal

- Remove the trim in the center of the instrument panel (Jetta from MY 2010, Golf Wagon from MY 2010). Refer to => [ Instrument Panel Center Trim ] Instrument Panel Center Trim.

- Pry the trim - 1 - out of its mounts in the instrument panel using the (3409).

- Disconnect the Front Passenger Airbag Disabled Indicator Lamp (K145) wiring harness - 2 - and remove the trim.





Installation

- To install, perform the steps used for removal in reverse order.