Setting Lock Carrier Service Position

Setting Lock Carrier Service Position

Service Position






- Remove front bumper cover.
- In vehicles with charge air cooler, disconnect pressure hoses.
- Unscrew bolts -5- at left and right longitudinal member.
- Install (T 10093) on left and right longitudinal members.
- Remove bolts -2- and -3- with stop buffer -4- at left and right on top of lock carrier -1-.
- Lock carrier -1- can be pulled toward front approx. 10 cm on (T 10093).

Resetting
- To install, perform the steps used for removal in reverse order.
- Align lock carrier and attachments with the longitudinal members and between fender.
- Make sure that pressure hoses for charge air cooler are re-engaged correctly.
- Hoses and lines must not be pinched.

Pressure Hoses, Releasing






- Disengage connector coupling -1- and disconnect pressure hose -2- in - direction of -arrow- from coupling.
- When re-connecting pressure hoses, make sure that connector couplings engage audibly.