Diagram 150/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Right front ABS wheel speed sensor, Left rear ABS wheel speed sensor, Blocking diode, ABS control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

C24 - Suppressor

G45 - Right front ABS wheel speed sensor Anti-lock Brake System w/ EDL/ASR/ESP [1][2]Diagrams

G46 - Left rear ABS wheel speed sensor Anti-lock Brake System w/ EDL/ASR/ESP [1][2]Diagrams

J29 - Blocking diode

J104 - ABS control module Control Modules in Engine Compartment [1][2]Diagrams

N133 - Right rear ABS inlet valve

N134 - Left rear ABS inlet valve

SC17 - Fuse 17 (on fuse panel C)

T2ae - Double connector

T2ai - Double connector

T2fl - Double connector

T38 - 38-pin connector

(B332) - Positive connection 18 (30a) (in main wiring harness)

(B469) - Connection 5 (in main wiring harness)

(B471) - Connection 7 (in main wiring harness)

(B514) - Positive connection 10 (30a) (in interior wiring harness)

(B537) - Connection 28 (in main wiring harness)

(B564) - Connection 31 (in main wiring harness)

* - Only for vehicles with Stop/Start system

*2 - From November 2008

*3 - Through May 2009

*4 - Depending on equipment

Previous Diagram 150/2 (Tracks 1-14)

Next Diagram 150/4 (Tracks 29-42)