Operation CHARM: Car repair manuals for everyone.

Diagram 116/7 (Tracks 71-84)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Right Rear Seat Heating Element, Right Rear Backrest Heating Element, Side Bolster Heater





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G95 - Right Rear Heated Seat Temperature Sensor Locations

J519 - Vehicle Electrical System Control Module Control Modules in Interior

T2a - Double Connector

T3cw - 3-Pin Connector

T3cx - 3-Pin Connector

T4 - 4-Pin Connector, black, below rear seat, right

Z12 - Right Rear Seat Heating Element Locations

Z13 - Right Rear Backrest Heating Element Locations

Z88 - Rear Seat - Left Side Bolster Heater (on front passenger's side) Locations

Z89 - Rear Seat - Right Side Bolster Heater (on front passenger's side) Locations

(78) - Ground Connection (on right lower B-pillar) Overview of Ground Connections in Interior

(381) - Ground Connection 16 (in main wiring harness)

(399) - Ground Connection 34 (in main wiring harness)

(B485) - Connection 21 (in main wiring harness)

(B486) - Connection 22 (in main wiring harness)

(M63) - Connection 3 (in rear seats wiring harness)

(M64) - Connection 4 (in rear seats wiring harness)

* - Where applicable

** - Applicable through April 2005

*** - Cross-section is dependent on equipment

**** - Applicable from May 2005

Previous Diagram 116/6 (Tracks 57-70)