Diagram 120/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's lumbar support





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E176 - Driver seat lumbar support adjustment switch Locations

J519 - Vehicle Electrical System Control Module Control Modules in Interior

S224 - Fuse in fuse panel, under instrument panel, left

SC36 - Fuse 36 (on fuse panel C)

T2jl - Double connector

T2jm - Double connector

T6cp - 6-pin connector

T6cq - 6-Pin Connector, in seat

T10c - 10-Pin Connector, black, connector station driver side, below seat

V125 - Driver seat lumbar support curvature adjustment motor Locations

V129 - Driver seat lumbar support height adjustment motor Locations

(140) - Ground connection 2 (in seat adjustment wiring harness)

(M2) - Positive connection 2 (30) (in seat adjustment wiring harness)

* - Applicable from May 2008

** - Applicable through April 2008

Previous Diagram 120/2 (Tracks 1-14)