Diagram 170/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Intake Air Temperature (IAT) Sensor, Fuel Pressure Sensor, Engine Coolant Temperature (ECT) Sensor, Intake Flap, Intake Manifold Runner Position Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor Locations

G42 - Intake Air Temperature (IAT) Sensor Locations

G62 - Engine Coolant Temperature (ECT) Sensor Locations

G247 - Fuel Pressure Sensor Locations

G336 - Intake Manifold Runner Position Sensor Locations

J519 - Vehicle Electrical System Control Module Control Modules in Interior

J623 - Engine Control Module (ECM) Control Modules in Engine Compartment

T2gy - Double Connector

T2gw - Double Connector, black

T3cj - 3-Pin Connector

T3ck - 3-Pin Connector

T5t - 5-Pin Connector

T6bu - 6-Pin Connector

T60 - 60-Pin Connector

V157 - Intake Flap Motor 2.0L CCTA, CBFA and BPY Overviews

(D103) - Connection 3 (in engine compartment wiring harness)

(D141) - Connection (5V) (in engine pre-wiring wiring harness)

(D174) - Connection 2 (5V) (in engine wiring harness)

Previous Diagram 170/8 (Tracks 85-98)

Next Diagram 170/10 (Tracks 113-126)