Ignition/Glow Plug System

Safety Precautions

To reduce the risk of personal injury and/or damage to the fuel injection and ignition system, always observe the following:

• Do not touch or disconnect ignition coils with power output stages when engine is running or turning at starting RPM.

• Only disconnect and reconnect wires for injection and ignition system, including test leads, when ignition is turned off.

If special testing equipment is required during road test, note the following:

• Test and measuring instruments must be secured to rear seat and operated by a second person from this location.

If the vehicle is involved in a collision while testing and measuring equipment is operated from the front passenger seat, the person sitting in that seat could be seriously injured when the airbag deploys.