Shift Cable: Testing and Inspection

Selector Lever Cable, Checking

Short description

In order to be able to check selector lever cable for ease of movement, it must be removed from transmission and the removed end must be laid down where it will not touch anything.

Then, selector lever is moved and cable is installed again.

Then, selector lever cable must be adjusted => [ Selector Lever Cable, Adjusting ] Adjustments.

Do not grease cable connection!

- Place selector lever in position "P".

- Pry cable - 1 - off shift rod lever - 3 - using open-end wrench - 2 -.





- Remove cable from bracket by pressing tabs together - arrows -.

- Move selector lever from "P" to "S" and to "P" again several times.

• Selector lever must have freedom of movement while doing so.

- Install cable again.

- Adjust cable!