Brake Booster Vacuum Sensor

Brake Booster Vacuum Sensor

Removing

On vehicles with 6-cyl. gasoline engine, the battery is in luggage compartment, accordingly only air filter housing must be removed.

- Remove the battery carrier.

- Disconnect harness connector - 1 - from brake booster vacuum sensor (G483) - 2 -.





- Insert a screwdriver between stop and one end of securing ring into groove of sealing ring.

- Press the circlip - 1 - just far enough out of the groove so that the brake booster vacuum sensor (G483) - 2 - can be pulled out of the brake booster.





Installing

- Installation is in reverse order of removal.