Left Rear Level Control System Sensor Assembly Overview, AWD

Left Rear Level Control System Sensor Assembly Overview, AWD

• Vehicle level sensor is available as replacement part only complete with coupling rod and upper and lower retaining plates.

• Replacing with subframe installed, refer to => [ Left Rear Level Control System Sensor, AWD ] Left Rear Level Control System Sensor, AWD.





1 Subframe

2 Bolt

• M5 x 20

• 5 Nm

3 Left Rear Level Control System Sensor (G76)

• Complete with components.

• Lever - arrow - must point toward vehicle exterior.

• Removing and installing, refer to => [ Left Rear Level Control System Sensor, AWD ] Left Rear Level Control System Sensor, AWD.

• If the left rear level control system sensor (G76) was removed and then installed, then a basic setting to the adaptive chassis must be performed. Refer to => [ Adaptive Chassis DCC, Basic Setting ] Programming and Relearning.

• After replacing, perform basic setting of the headlamps via the Guided Fault Finding function using the Vehicle Diagnosis, Testing and Information System (VAS 5051).

4 Lower Transverse Link