Lock Carrier

Lock Carrier

=> [ Lock Carrier with Attachments ]

Lock Carrier with Attachments

Removing

• The lock carrier is a safety-relevant component and for this reason it may not be serviced.

• If damaged, replace the lock carrier.





- Bring the lock carrier and its attachments into the service position - 1 -.

- Disconnect the electrical harness connectors present.

- Drain the coolant and disconnect coolant line.

- Disconnect condenser lines.

- Be sure to perform the work procedures if the vehicle has adaptive cruise control (ACC).

- With a second technician, remove (T 10093) on longitudinal member on left and right sides and lift out lock carrier.

CAUTION!
Do not start the engine when the A/C system or coolant lines are disconnected.

• Do not hang the condenser and hydraulic oil cooler by the lines.

• Do not kink the condenser and hydraulic lines.

Installing

To install, perform the steps used for removal in reverse order.

• Make sure that all plug- and hose connections are corrected installed when re-assembling.

- Align the lock carrier with the longitudinal members and between the fenders.