Brake Light Switch: Service and Repair

Brake Lamp Switch

Removing

- If the vehicle has a coded radio, get the radio code from the customer before beginning.

- Disconnect battery.

- Remove intake hose, air filter housing (on vehicles with diesel engine and some gasoline engines) and battery.

On vehicles with 6-cyl. gasoline engine, battery is in luggage compartment, accordingly only air filter housing must be removed.

- Remove the battery carrier.

- Disconnect the connector - 1 - from brake lamp switch (F).





- Remove bolt - 2 - from brake master cylinder.

- Pull the brake lamp switch - 3 - upward and off from the brake master cylinder and remove it from the clip at the bottom.

Installing

- Installation is in reverse order of removal.