Leak Detection Pump: Service and Repair

Leak Detection Pump

Removing

- Remove the right rear wheel housing liner.

- Disconnect the vacuum line - 1 -.





- Disconnect the electrical connector - 2 -.

- Disconnect the vent line - 3 -.

- Remove the nuts - arrows -.

- Remove the Leak Detection Pump (LDP) with bracket.

Installing

Installation is performed in the reverse order of removal, noting the following:

• Secure the vent line - 3 - with a new hose clamp.

- Install the right rear wheel housing liner.

Tightening Specifications

- Refer to => [ EVAP System Assembly Overview ] EVAP System Assembly Overview.