Left and Right Front Level Control System Sensors

Left and Right Front Level Control System Sensors

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1410)

• Vehicle Diagnosis, Testing and Information System (VAS 5051B)

Removing

- Remove the front wheel housing liner.

- Disconnect the connector - 4 - from the vehicle level sensor - 3 -.





- Remove the pin in - direction of arrow - and unclip the connecting link from the upper control arm.

- Remove bolts - 1 -. Do not bend the bracket - 2 -.

Installing

Installation is the reverse of removal, with special attention to the following:

- Install the front wheel housing liner.

- Perform a basic setting on the level control system via the Guided Functions with the (VAS 5051B).

Tightening Specifications