Left and Right Front Level Control System Sensors, Vehicles with Air Spring Damper

Left and Right Front Level Control System Sensors, Vehicles with Air Spring Damper

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1410)

• Vehicle Diagnosis, Testing and Information System (VAS 5051B)

Removing

- Remove the front wheel housing liner.

- Disconnect the connector - 4 - from the vehicle level sensor - 3 -.





- Remove the pin in - direction of arrow - and unclip the connecting link from the upper control arm.

- Remove screws - 1 -. Do not bend the bracket - 2 -.

Installing

Installation is the reverse of removal, with special attention to the following:

- Install the front wheel housing liner.

- Perform a basic setting on the level control system via the Guided Functions with the (VAS 5051B).

Tightening Specifications