Timing Mechanism Drive Chain Assembly Overview

Timing Mechanism Drive Chain Assembly Overview





1 Guide rail

2 Bolt, 10 Nm + 90° (1/4 turn) additional turn

• Replace

3 Bolt, 22 Nm

4 Thrust washer for drive sprocket

5 Drive sprocket for left timing chain

6 Bolt, 10 Nm + 90° (1/4 turn) additional turn

• Replace

7 Power take off drive chain

• Before removing, mark direction of rotation with paint. Reversing the rotation direction of a used chain can destroy it.

• Removing and installing, refer to => [ Timing Mechanism Drive Chain ] Timing Mechanism Drive Chain.

8 Guide rail

9 Bolt, 10 Nm + 90° (1/4 turn) additional turn

• Replace

10 Bolt, 9 Nm

11 Mounting bracket for drive sprocket

• For right camshaft timing chain.

• Asymmetrical version.

• Installed location, refer to => [ Right Camshaft Timing Chain Drive Sprocket Mounting Bracket Location ]

12 Thrust washer

13 Drive sprocket for right timing chain

14 Pivot pin for drive sprocket

15 Bolt, 42 Nm

16 O-ring

• Replace

17 Chain tensioner

18 Bolt, 5 Nm + 90° (1/4 turn) additional turn

• Replace

19 Crankshaft

20 Bolt, 10 Nm + 90° (1/4 turn) additional turn

• Replace

Right Camshaft Timing Chain Drive Sprocket Mounting Bracket Location





• Alignment bushings in right camshaft timing chain drive sprocket mounting pins - 3 - must engage in holes in thrust washer - 1 - and cylinder block.

2 Drive sprocket for right camshaft timing chain
4 Bolt - 42 Nm