Seat Trim, without Height Adjustment

Seat Trim, without Height Adjustment

The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Using assembly tool (3399) , reach behind a locking mechanism of backrest adjusting wheel - 1 -.

- Pry assembly tool (3399) outward - arrow A - and remove backrest adjusting wheel from seat.

- Compress clamping pin - 2 - inward and remove expanding clip - 3 -.

- Remove the bolt - 4 - (3.5 Nm).

- Remove trim - 5 - from seat frame.






Installing

- Install in reverse order of removal.