Operation CHARM: Car repair manuals for everyone.

Accelerator Pedal Module






Accelerator Pedal Module

Special tools, testers and auxiliary items required

Release Tool (T10238)

Removing

- Remove the steering column cover fasteners - arrows - and covers.





- Pry out the cap - 3 - with a screwdriver.





- Remove the bolt - 2 -.

- Disconnect the connector - 1 - - arrow - from the accelerator pedal module.

- Slide the (T10238) as shown into the openings designated for it until it stops and remove the accelerator pedal module.





Installing

- Connect the connector - 1 - to the accelerator pedal module - 4 -. Lock the connector - arrow -.





- Press the accelerator pedal module onto the retaining pins - 5 -.

- Insert the centering pin - 6 - into the hole on the vehicle floor.

- Secure the accelerator pedal module with the bolt - 2 - and install the cap - 3 -.

- Reinstall steering column cover and fasteners - arrows -.





Tightening Specification