Accelerator Pedal Module Assembly Overview

Accelerator Pedal Module Assembly Overview





1 Connector

• Black, 6 pin.

2 Throttle Position (TP) Sensor (G79) and Accelerator Pedal Position Sensor 2 (G185)

• Both sensors are integrated into one housing.

• Not adjustable.

• The TP sensor transmits the driver control to the Engine Control Module (ECM).

• - A - Openings for the release tool (T10238).

• Removing and installing, refer to --> [ Accelerator Pedal Module ] Accelerator Pedal Module.

3 Bolt, 9 Nm

4 Cap