Engine and Transmission, Separating and Assembling

Engine and Transmission, Separating and Assembling

Special tools, testers and auxiliary items required

• Shackle (10-222A/12)

• Shop crane (VAS 6100)

Conditions

• Engine/transmission assembly removed and mounted on the (T10359).

Separating

- Remove the starter..

With a DSG Transmission

- Remove the coolant hoses from the transmission oil cooler and seal off the openings.

Continuation for All

- Disconnect all electrical connectors from the transmission to the engine and free them up.

- Install the (10-222 A/12) to the transmission and support using the (VAS 6100), but do not lift.





- Remove the upper engine/transmission bolts.

- Before removing the last bolts, support the transmission with the (VAS 6100).

- Remove the lower engine/transmission bolts.

- Separate the transmission from the engine; when doing this, guide the transmission.

Assembling

Assembly is performed in reverse order of removal; pay attention to the tightening specifications:

• With a manual transmission, refer to --> Manual Transmission Specifications.

• With a DSG transmission, refer to --> Automatic Transmission Specifications.