Charge Air Hose Connector Coupling, Disconnecting and Connecting

Charge Air Hose Connector Coupling, Disconnecting and Connecting

CAUTION!
Connector coupling sealing ring can be damaged if securing clamp is in locked position when installing. This would result in a leak. Follow assembly instructions.

Disconnecting

- Release the connector coupling by pulling the locking clip - arrow -. Separate the hose without assistance from tools.





Connecting

- When replacing the sealing ring, lay the ring in the charge air hose groove. Ensure the sealing ring sits completely in the groove all the way around and is not twisted.

- Lightly oil the sealing surfaces and the sealing ring.

- Bring the securing clip into the release position - 1 -.





- Slide the charge air hose into the clutch until seated.

- Bring the securing clip into the lock position - 2 - and then press the charge air hose back again.

- Check for correct seating and proper locking of connector by pulling on hose.