Procedures

Selector Lever Cable, Checking

Brief description

To check smoothness of selector lever cable, remove cable from transmission and set down removed end in such a way that it does not hit anything.

Then move selector lever and reinstall cable.

Then selector lever cable must be adjusted --> [ Selector Lever Cable, Adjusting ] Adjustments.

Do not grease cable connection!

- Move selector lever to position P position.

- Lever cable - 1 - from selector shaft lever - 3 - using an open jaw spanner - 2 -.





- The cable is removed from support bracket by pressing catches together - arrows -.

- Move selector lever repeatedly from P to S and back to P.

• Selector lever must move easily.

- Reinstall cable.

- Adjust cable!