Shifter Knob and Cover

Shifter Knob and Cover





1 Shift lever knob

• With boot

• The shifter knob and boot cannot be separated from each other.

• Always replace together

• Removing and installing --> [ Boot with Shifter Knob and Noise Insulation ] Boot with Shifter Knob and Noise Insulation

2 Boot

• Removing and installing --> [ Boot with Shifter Knob and Noise Insulation ] Boot with Shifter Knob and Noise Insulation

• Always replace together

3 Clamp

• For securing the shifter knob to the shift lever

• Secure with Hose Clamp Pliers (V.A.G 1275) on shifter knob --> [ 1 Shift lever knob ]

• Always replace

4 Noise insulation

• Not equipped on all vehicles

• Arrow on noise insulation points in direction of travel

• Catches are arranged in varying intervals

• Therefore, installation is only possible in one position