Rear Lid Trim

Rear Lid Trim

Rear Lid Trim

Removal

- Remove bolts - 1 - and - 3 - (1.5 Nm) respectively on right and left sides in handle recesses.

- Remove cover from trim and unscrew two bolts - 2 - (1.5 Nm).

- Using (3392), disengage trim - 4 - out of mounts in lid.

- Disengage trim - 4 - at the side from mounts in window frame trim - 5 -.

- For vehicles with electric lid control, disconnect wiring harness from switch - 6 -.





Installation

- To install, perform the steps used for removal in reverse order.

• Before installing, check metal clips for damage and replace if necessary.