Left Rear Level Control System Sensor, FWD

Left Rear Level Control System Sensor, FWD

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1331)

• Vehicle Diagnosis, Testing and Information System (VAS 5051)

Removing

- Disconnect the connector.





- Remove the bolts.

- Remove left rear level control system sensor.

Installing

Installation is performed in the reverse order of removal. Observe the following when doing so:

The level control system sensor lever must point toward vehicle exterior.

- Perform a basic setting on the adaptive chassis DCC. Refer to => [ Adaptive Chassis DCC, Basic Setting ] Programming and Relearning.

- Perform a basic setting on the headlamps via the Guided Fault Finding function using the (VAS 5051).

Tightening Specifications