B1985
B1985 - Power Liftgate Latch Control 2 Circuit High
For a complete wiring diagram, refer to.
• When Monitored: Anytime the power liftgate is performing a power cinch or release operation.
• Set Condition: When the liftgate latch motor cinch or release output is pulled high prior to or during a latch cinch or release operation, this code will set.
Test Step 1 - DTC Present
• With the scan tool, record and erase DTCs.
• Turn the ignition OFF, wait 10 seconds, then turn the ignition ON.
• Operate the power liftgate several times if possible.
• With the scan tool, check for DTCs.
• If the B210E - Battery Voltage HIGH DTC is present, repair that code before proceeding.
Does the scan tool display B1985 - Power Liftgate Latch Control 2 Circuit High?
Yes
• Go to Test Step 2.
No
• Using the wiring diagram/schematic as a guide, inspect the wiring and connectors for an intermittent condition. Operate the liftgate several times and check for any binding conditions in the latch assembly.
• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior
Test Step 2 - Power Liftgate Module
• Turn the ignition OFF.
• Disconnect the power liftgate module C2 harness connector.
• Turn the ignition ON.
• Measure the voltage of the liftgate latch Cinch driver circuit.
Is there any voltage present?
No
• Replace the power liftgate module.
• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior
Yes
• Go to Test Step 3.
Test Step 3 - Check the Liftgate Latch Cinch Driver Circuit for a Short to Voltage
• Disconnect the power liftgate latch harness connector.
• Measure the voltage of the liftgate latch cinch driver circuit.
Is there any voltage present?
Yes
• Repair the liftgate latch cinch driver circuit for a short to voltage.
• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior
No
• Repair the liftgate latch release driver circuit for a short to voltage.
• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior