B229B

B229B-00-Passive Entry Module (PEM) Internal

For a complete wiring diagram, refer to.

• When Monitored: Whenever the module is awake.

• Set Condition: This code is set immediately if the Passive Entry Module internal self test fails.






Test Step 1 - VERIFY THAT DIAGNOSTIC TROUBLE CODE (DTC) B229B-00-PASSIVE ENTRY MODULE INTERNAL IS ACTIVE

• With the scan tool, record and erase the DTCs.

• Cycle the ignition switch off then back on.

• With the scan tool, read the Active DTCs.

Does the scan tool display: DTC B229B-00-PASSIVE ENTRY MODULE INTERNAL as Active?

Yes

• Replace the Passive Entry Module..

• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior

No

• Test complete, the condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals and correct pin tension.

• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior