Seat Cushion Side Shields

Seat Cushion Side Shields

Removing

- With the shield in the down position, carefully lift shield vertically to disengage the two plastic clips from the rods located on the cushion frame and on the riser.

- Using needle nose pliers, lift the spring leg upward to disengage it from the rear rod on the riser and remove the shield.

- Remove the seat cushion side shields from the side of the seat being serviced.

Installing

- Install the seat cushion side shields.

- Position the shield to the side of the seat being serviced and using needle nose pliers, hook the spring leg over the rear rod on the riser.

- Engage the two plastic clips to the two rods located on the cushion frame and on the riser.