Headrest Sleeve

Headrest Sleeve

Removing

• Illustration shown with seat back cover and foam removed for clarity.

- Remove the headrest. Refer to => [ Headrest ] Headrest.

- Remove the plastic seat back cover. Refer to => [ Seat Back Panel ] Seat Back Panel.

- Remove the seat back cushion cover. Refer to => [ Seat Back Cover and Cushion ] Seat Back Cover and Cushion.

- Using pliers, reach up under the seat back cushion cover and disengage the tab securing each head restraint sleeve to the seat back frame.

- With the tabs disengaged, pinch the barbs together and push the head restraint sleeves upward and out of the seat back.

Installing

• Head restraint sleeves are not interchangeable. The sleeve with adjustment lock button is positioned on the inboard side of the seat.



- Push the head restraint sleeves downward until the tabs and barbs are fully engaged to the seat back frame (4).

- Remove the seat back cushion cover. Refer to => [ Seat Back Cover and Cushion ] Seat Back Cover and Cushion.

- Install the plastic seat back cover. Refer to => [ Seat Back Panel ] Seat Back Panel.

- Install the headrest. Refer to => [ Headrest ] Headrest.