Seat

Seat

Special tools, testers and auxiliary items required

• Trim Removal Wedge (RMCP101)

Removing






- With the third row seat folded into the floor well, use trim removal wedge (RMCP101), to disengage the clips (1) securing the anchor molding (3) to the seat frame.






- Remove the bolts (1) securing the front of the seat to the floor panel.






- Raise the seat to the upright position.

- Remove the bolts (1) that secure the hinges at the rear of the seat to the floor panel in the sequence shown and remove the rear seat.

Installing






- Position the third row seat into the vehicle.

- Install the bolts (1) securing the four hinges at the rear of the seat to the floor panel. Tighten the bolts in the sequence shown to 89 Nm (66 ft lbs).






- With the third row seat folded into the floor well, install the bolts (1) securing the front of the seat to the floor panel. Tighten the bolts to 58 Nm (43 ft lbs).






- Position the anchor molding (3) to the seat frame.

- Align the locating pins (2) and engage the clips (1) that secure the anchor molding to the seat frame.