Seat

Seat

Removing






- With the third row seat folded into the floor well, remove the bolts (1) that secure the front of the seat to the floor panel.






- Raise the seat to the upright position.

- Disconnect the electrical connectors.

- Remove the bolts (1) securing the hinges at the rear of the seat to the floor panel in the sequence shown and remove the rear seat from the vehicle.

Installing






- Position the third row seat into the vehicle.

- Connect the electrical connectors.

- Install the bolts (1) securing the four hinges at the rear of the seat to the floor panel. Tighten the bolts in the sequence shown to 89 Nm (66 ft lbs).






- With the third row seat folded into the floor well, install the bolts (1) that secure the front of the seat to the floor panel. Tighten the bolts to 58 Nm (43 ft lbs).