Control Head for Telematics

Control Head for Telematics

Removing

Before starting repair work, batteries must be disconnected!

- Unclip cover in roof console with a suitable screwdriver at locations marked with - arrows -.





- Unclip display unit with a suitable screwdriver on places marked with - arrow - on both sides.





Pull locking mechanism on display unit connector out in - direction of arrow -.





- Press securing tab in - direction of arrow - and remove connector.





• It is not possible to further disassemble and repair control head.

Installing

Installation is performed in the reverse order of removal.

- Check coding of Telematics system and code it anew if necessary. Refer to => [ Telematics Control Module, Coding ] Testing and Inspection.