Right Front Body Acceleration Sensor

Right Front Body Acceleration Sensor

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1410)

Removing

- Remove wiper arms.

- Remove the left and right plenum chamber cover.

- Release and disconnect the connector.





- Remove the nuts and remove the right front body acceleration sensor.

Installing

Installation is performed in the reverse order of removal. Observe the following when doing so:

CAUTION!
The front body acceleration sensors must never be interchanged with the rear body acceleration sensors.

- Be sure to pay attention to the installation position of the right front body acceleration sensor retainer.





The tab on the retainer - 1 - must fit into the recess in the right front body acceleration sensor - arrow -.

• Be sure to use the correct retainer. An R is stamped on the retainer.

Tightening Specifications