Rear Window Wiper Arm

Rear Window Wiper Arm

- Switch rear window wipers on and off again with ignition on in order to drive wiper arm into rest position.

- Fold cover cap - 1 - of rear window wiper up and unclip it.





- Loosen hex nut (SW 13) - arrow -, without completely removing.

• Aero-wiper blades are very flexible. Grasp wiper blade only in area of wiper blade mount to lift them off rear window.

- Fold up wiper arm and remove from cone moving it sideways.

- Remove the hex nut - arrow - and remove wiper arm.

Installing





- Switch rear window wipers on and off again with ignition on in order to drive wiper motor into rest position.

- Insert wiper arm on wiper arm shaft at approximate rest position and hand-tighten nut - arrow -.

- Set rest position of rear window wiper, refer to => [ Rear Window Wiper Blade Park Position, Adjusting ] Rear Window Wiper Blade Park Position, Adjusting.