Totally Integrated Power Module

Totally Integrated Power Module

Description

All of the electrical current distributed throughout this vehicle is directed through the standard equipment totally integrated power module. The molded plastic TIPM housing is located on the left side of the engine compartment. The TIPM housing has a molded plastic cover. The TIPM cover is easily removed for service access and has a convenient fuse layout label affixed to the inside surface of the cover to ensure proper component identification.

The TIPM housing is secured to the TIPM bracket by four clips integral to the TIPM housing. All of the TIPM outputs are through the integral engine compartment wire harness.

Operation

All of the current to the TIPM comes directly from the positive battery cable to a stud located on the bottom of the TIPM. The cable is secured to the TIPM stud with a nut. Internal connection of all the TIPM circuits is accomplished by an intricate network of hard wiring and bus bars. Refer to for complete circuit diagrams.

The fuses, relays and TIPM housing are available for service replacement.