Solenoid and Pressure Switch

Solenoid and Pressure Switch

Removal

- Remove the valve body. Refer to => [ Valve Body ] Valve Body.






- Remove the clamp plate bolts (1) and clamp plate (2).






- Disconnect the pressure control solenoid (2) and line pressure sensor (1) electrical connectors.

- Remove the solenoid and pressure switch assembly.

Installing






- Place the solenoid and pressure switch assembly into position.

- Install the clamp plate (2) and bolts (1). Tighten the bolts to 6 Nm (53 in lbs).






- Connect the pressure control solenoid (2) and line pressure sensor (1) electrical connectors.

- Install the valve body. Refer to => [ Valve Body ] Valve Body.