B224E

B224E - Power Liftgate Module Internal

For a complete wiring diagram, refer to.

• When Monitored: Whenever the battery is connected.

• Set Condition: When the module senses an internal problem, this code will set.






Test Step 1 - DTC Present

• With the scan tool, record and erase DTCs.

• Cycle the ignition switch from On to Off.

• Wait 30 seconds.

• Turn the ignition ON.

• With the scan tool, check for DTCs.

Does the scan tool display Power Liftgate Module Internal?

No

• Operate the power liftgate open and closed several times. With the scan tool, read the DTCs. If this code appears, replace the power liftgate module.

• Perform the Body Verification Test. Refer to=> Non-DTC Based Diagnostics. Body Interior

Yes

• Replace the power liftgate module.

• Perform the Body Verification Test. Refer to=> Non-DTC Based Diagnostics. Body Interior