Footwell Covers

Footwell Covers

Removing

- Switch off ignition.

- Pry passenger side footwell cover - 1 - out of mountings near the clips - 2 - using wedge (T10039/1).

- Pull cover out of rear mountings.

- Disconnect the wiring harness from the footwell light - 3 -.

- Remove the bolt - 4 -.

- Pry driver side footwell cover - 5 - out of mountings near the clip - 6 - using wedge (T10039/1).

- Pull cover out of rear mountings.

- Disconnect the wiring harness from the footwell light - 7 -.

- Separate wiring harness - 8 - from the diagnostic connector - 9 -.





Installation

- To install, perform the steps used for removal in reverse order.