Access/Start Authorization Antenna 1 in Vehicle Interior (R138)

Access/Start Authorization Antenna 1 in Vehicle Interior (R138)

The access/start authorization antenna 1 in the vehicle interior is located under the front center console, in front of the selector lever.

No coding, basic setting or adaptation is necessary if Interior Access/Start Authorization Antenna 1 is replaced. Erase the entry in the DTC memory using the Vehicle diagnostic tester.

• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the center console cover.

- Remove the access/start authorization antenna 1 in vehicle interior - 1 - - arrow -. Pay attention to the wires still connected.






- Disconnect the connector - 2 - and remove the access/start authorization antenna 1 in vehicle interior - 1 - from the vehicle.

Installing

Install in reverse order of removal.

• It is not possible to remove the bracket for the access/start authorization antenna 1 in vehicle interior in the center console without breaking it. If the antenna bracket must be removed, then install a new bracket so that there will not be any rattling noises and the KESSY system will continue to work correctly.