Front Air Distribution Door Motor (V426) with Position Sensor (G642)

Front Air Distribution Door Motor (V426) with Position Sensor (G642)

Removing

- Remove the instrument panel..

- Disconnect the connector - 2 - from the front air distribution door motor - 1 -.

- Remove the bolts - 3 - (1.5 Nm).

- Remove the front air distribution door motor - 1 - from the heater and A/C unit.






Installing

Install in reverse order of removal.

• After installing, function of air distribution door must be checked.

• Perform a "basic setting" using the Vehicle Diagnostic Tester. Refer to => [ Checking and Adjusting Components, Automatic Control System ] Checking and Adjusting Components, Automatic Control System

• .Check and erase the DTC memory.