CD Changer: Service and Repair

CD Changer

Special tools, testers and auxiliary items required

• Radio Removal Tool (3316)

Radio Removal Tool (3316) is made up of two identical parts.

• The CD changer is not faulty if the CD changer plays commercially available CDs, but not self-burned CDs. Replacing the CD changer for this reason is not permitted.

• Mixed CDs (CDs that contain computer data and also music) cannot be played.

• Music CDs with 8 cm diameter (mini-discs) cannot be played back.

• When retrofitting CD changer, radio functions must always be coded again.

Removal

Do the following before starting the procedure:

- If necessary, remove CDs remaining in CD changer. Refer to the Owner's Manual.

- Turn off the ignition and all electric consumers and remove the key.

- Open center armrest lid.

- Slide (3316) into slots designed for them on CD changer at left and right - arrows - until they engage audibly.






- Pull out CD-changer using radio removal tools - arrows -.






- Disengage harness connector at points designated with - arrows - and disconnect it.






- Press on retaining clamp - arrow - and pull out radio removal tools from removed unit.






Installation

Install in reverse order of removal.